Snapper 150Z Series Manuel d'utilisateur Page 10
- Page / 44
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
OPERATION
8
Ground Speed Levers
These levers control the ground speed of the rider. The
left lever controls the left rear drive wheel and the right
lever controls the right rear drive wheel.
Pushing the levers out to the side, away from the
operator’s lap (top inset, Figure 1), is the proper position
for starting the rider. Pulling the levers in across the
operator’s lap puts the levers in DRIVE positions.
From DRIVE position, moving a lever forward increases
the FORWARD speed of the associated wheel. Pulling
back on a lever increases the REVERSE speed. The
further a lever is pushed, the faster the drive wheel will
turn.
See DRIVING PRACTICE for steering instructions.
Parking Brake Lever
Move the parking brake lever (bottom inset, Figure 1) up
and across and into the locking notch to engage and lock
the parking brake. Move the parking brake lever across
and down to disengage the parking brake. The engine
will not start unless the parking brake is engaged.
Note: The parking brake must be disengaged before
operating the ground speed levers.
Engine Speed Control
The engine speed control adjusts engine speed. Always
set the engine speed to FAST for driving and mowing.
Move the engine speed control back to SLOW to
decrease engine speed. NEVER turn on the mower
blades with the engine speed set to SLOW. Only turn on
the mower blades with the engine speed set to FAST.
Figure 1. Controls
Left
Ground Speed
Control Lever
Right
Ground Speed
Control Lever
Fuel Tank
Cap
Transmission
Release Levers
Parking
Brake
Lever
Mower
Cutting
Height
Switch
Ignition
Switch
Mower Blade
Switch
Engine
Speed
(Fast)
Engine
Speed
(Slow)
Choke
(Closed)
Choke
(Open)
OFF
RUN
START
Ground Speed Levers -
DRIVE Positons
Ground Speed Levers -
START/PARK Positons
CONTROL FUNCTIONS
The information below briefly describes the
function of individual controls. Starting,
stopping, driving, and mowing require the
combined use of several controls applied in
specific sequences. To learn what combination
and sequence of controls to use for various
tasks please read the entire section.
Parking Brake Lever -
DISENGAGE Positon
Parking Brake Lever -
ENGAGE Positon
- OPERATOR’S 1
- TABLE OF CONTENTS 3
- SAFETY RULES 4
- CHILDREN 5
- EMISSIONS 5
- IGNITION SYSTEM 5
- SLOPE OPERATION 5
- ONLY RIDE UP AND DOWN HILL 6
- NOT ACROSS HILL 6
- 10 DEGREES MAX 6
- SERVICE AND MAINTENANCE 7
- SAFETY & OPERATION DECALS 8
- IDENTIFICATION NUMBERS 9
- OPERATION 10
- GENERAL OPERATING SAFETY 11
- WARNING - TRAILERS 12
- PUSHING THE RIDER BY HAND 13
- EMERGENCY STOPPING 13
- STARTING THE ENGINE 13
- BASIC DRIVING 14
- ADVANCED DRIVING 15
- MOWER DECK REMOVAL & 16
- INSTALLATION - 33” DECKS 16
- MAINTENANCE 18
- Rider Maintenance Items 19
- LUBRICATION 20
- Figure 21. Lubricating Rider 21
- Figure 22. Lubricating Rider 21
- CLEAN DECK & 22
- CHECK / REPLACE MOWER BLADES 22
- CLEAN THE BATTERY AND CABLES 24
- CHECK RIDER SAFETY 24
- CHECK / ADJUST PTO CLUTCH 25
- Engine Maintenance Items 26
- SERVICE AIR FILTER & 27
- SERVICE AIR FILTER 28
- 24 & 26HP ENGINES 28
- REPLACE SPARK PLUG 29
- CLEAN COMBUSTION CHAMBER 29
- BRIGGS & STRATTON MODELS 29
- GROUND SPEED CONTROL LEVER 30
- ADJUSTMENT 30
- SPEED BALANCING ADJUSTMENT 30
- CUTTING HEIGHT ADJUSTMENT 30
- PTO CLUTCH ADJUSTMENT 30
- BRAKE ADJUSTMENT 31
- BATTERY CHARGING 31
- ENGINE ADJUSTMENTS 31
- MOWER DECK LEVELING 32
- ADJUSTMENTS 32
- MOWER BELT REPLACEMENT 36
- Arbor Drive Belt Replacement 37
- Before Storage 37
- After Storage 37
- TROUBLESHOOTING 38
- Troubleshooting the Mower 39
- SERVICE ITEMS 41
- Lawn Care 42
- & Mowing Information 42
- WHEN AND HOW OFTEN TO MOW 43
- PROPER MOWING SPEED 43
Produits connexes et manuels pour Matériel de jardinage Snapper 150Z Series
(20 pages)Philips Bandeja para agua sobrante podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Dla domu Philips Bandeja para agua sobrante.
Dostarczamy 1 pdf podręczników Philips Bandeja para agua sobrante do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels