Snapper 1685336 Manuel d'utilisateur télécharger pdf

GENERAL

The Spring Assist Kit is used to retrofit the hitch used to

install the 42” and 46” Snow Plow/Dozer Blade on

several different models (series) of tractors. For easier

understanding of this instruction sheet, first identify the

size of blade (42”

or 46”) and group of tractor on which

you are working. Follow these specifications throughout

the ten steps.

Tractors:

Group 1:

600,4000,5000

Group 2: 800,600O

Group 3: 700,700O

Group 4: 900, 7100

Snow Plow/Dozer Blade:

42”

Mfg. No. 1690085 (Group 1, 2 tractors)

42”

Mfg. No. 1691520 (Group 3, 4 tractors)

46”

Mfg. No. 1~690088 (Group 3, 4 tractors)

IT PARTS

Mounting location for 42” blade on Group 2 tractors

Use 0, 1, 2 or 4 links

Mounting location for 42” Group 1, 3 and

4 tractors

Mounting location for

46” blade on Group 3

z&d

4 tractors

r,gure

n,r

I-aITs

Ref. Description

Gty.

Part Number

A. NUT, Hex Lock,

5/l&18

1923362

WASHER, Plain,

5/16

2 1919381

CAPSCREW,5/16-18x1-1/4

1921977

D. CHAIN, 4-Links

1669241

SPRING

1675232

INSTALLATION

INSTRUCTIONS

SPRING ASSIST KIT

MFG. NO. 1685336

INSTALLATION

1. Park tractor on a flat, level surface. Shut off engine,

remove key and apply parking brake.

2. Release lift handle so that dozer blade rests on the

ground.

3. Remove spring clip from king pin (A, figure 2).

Remove king pin and pivot pin (B) from push bar.

Slide dozer blade forward and

remcwe

from push

bar.

4. Remove cotter pin (C) from rod guide(D). Remove

rod guide from hitch bracket

(E).

Push bar should

now be free to move up and down.

Figure 2. Dozer Blade Removal

A. King Pin

B. Pivot

C. Cotter Pin

D. Rod Guide

E. Hitch Bracket

5. Drill a hole in the bottom cross member (42” blade

on Group 1, 3 and 4 Series tractors) or

upper cross member (42” blade on Group 2 tractors)

according to the diagrams of the templates in

figure

3. Actual templates are on a separate insert included

with these instructions.

For 46” blades on Group 3 and 4 tractors, drill a

,406”

hole in the (top) front plate. Hole should be located

2-3/4” left of centerline and 1/2”forward of the plate

rear edge. (Refer to figures 7E

+7F.)

FcmM

1701916

PRlNTED

IN U.S.A.

878

1 2 3 4

INSTALLATION 1
INSTRUCTIONS 1

Résumé du contenu

Page 1 - INSTRUCTIONS

GENERALThe Spring Assist Kit is used to retrofit the hitch used toinstall the 42” and 46” Snow Plow/Dozer Blade onseveral different models (series) of

Page 2

Figure 3. Diagrams of Hitch Templates6. Assemble the chain (D, figure 1) to the tractor asfollows:42” Blade on Group 1 and 2On left-hand side, remove

Page 3

Figure 7A. 42” Blade -Group1Figure 76. 42” Blade - Group 21 MemberFrom Top DownFigure 7D. 42” Blade - Group 4Figure 7E. 46” Blade - Group 3Figure 7C.

Page 4

Upper Cross Member(42” blade on Group 2)3/S” Dia.Bottom Cross Member142” Blade on Group 1, 3 & 4)Actual Templates of Figure 3.INSERT - 1701016

Commentaires sur ces manuels

Pas de commentaire

Snapper 1685336 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel de jardinage Snapper 1685336. Snapper 1685336 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Snapper 1685336